Hi, I finally finished my Mimosa Culottes! According to my May blog post on PDF patterns, I bought this Named Clothing pattern about a year ago. Then I made my first muslin last fall. I got fitting help from Jennifer Serr at the Bay Area Sewists fitting meetup, which I blogged about here. This wide-leg design has two unique diagonal pleats in the front and two darts in the back, pockets, and a front zipper (more detailed photos are below).
I made size 44 (US 12, UK 18), which has a waist of 33 inches (84 cm) and a hip of 42 1/2 (108 cm). If I had made these two years ago, I would have made a size smaller but waistlines change. My hips are about 43 inches (109 cm) but I thought it was a good bet that the fit would be fine because of the wide legs so I didn’t add any additional ease to the hips – that’s the beauty of culottes!
I really like black but it’s hard to photograph. I got lucky with a couple of photos and the sun just happened to highlight my fabric. It’s a lightweight jacquard made out of some synthetic fiber. I found it among the discount designer fabrics on the second floor at Stonemountain & Daughter Fabrics in Berkeley. There are flowers in the design, which you can see in this photo (taken after the photos shoot in bright sunlight to get the details).
I forgot that high-waisted designs limit what you can wear with them. You either need to wear something cropped or a close-fitting top that you can tuck inside. I got this cropped knit top from Urban Outfitters several years ago. I haven’t worn it much because it hits me at the hips and doesn’t really work with my other garments unless I layer it with a longer tee underneath. I was happy to wear this top with my new culottes. A former co-worker of mine called it my seeing-eye chart top. 😉
The Mimosa Culottes have nice deep pockets. I can put my whole hand in them! I have long fingers so this is a big deal. My husband is about 7 inches (nearly 18 cm) taller than I am but our hands are the same length. Really.
I take all my blog photos so it’s a big challenge to see the details of the culottes. I can only focus on the wall. I use the timer on my Sony Cyber-shot digital camera and my iPhone 6. I don’t have a camera remote control. This means that’s it’s tough to get photos in focus and the correct exposure but I take a lot of photos and hope for the best.
Mimosa Culottes – Details
Here are some photos with some of the details that you can’t see in the photos above. The pleats are at a diagonal slant, which is an interesting detail. I lightened the photos a little so you can see the floral design on the fabric.
There are two darts in the back.
Here’s what the inside front looks like with the pockets and the fly shield, the fabric behind the zipper. The Mimosa Culottes have a button and hook/eye closure. I used a flat red button that was in my stash.
My fabric was lightweight so I didn’t use a lining fabric, which meant I really didn’t need an inner and outer pocket bag. The inner pocket bag is the pattern piece you cut using your fashion fabric so you won’t see the lining. I wasn’t thinking when I cut my pattern pieces. The inner pocket bag pieces have interfacing fused to them. If you want to use the same fabric for the entire pocket, just put the two pocket bag pieces together to make one pocket bag and cut four.
Check out the pocket. It’s looks rather professional, doesn’t it? I haven’t made pockets like this before because I usually sew skirts with pockets in the side seam. But I’m in desperate need of pants (trousers) these days. So I will be sewing more over the coming months.
Here are a few more construction details: After you’ve attached the waistband, you’re supposed to place the folded edge so that it slightly overlaps the waist seam on the wrong side; then stitch in the ditch from the right side. Instead, I hand stitched the waistband in place on the inside. When I stitch in the ditch on the right side, I don’t always catch the folded edge on the other side so I opted to hand stitch.
I finished my hem with seam tape and hand stitched it in place.
Mimosa Culottes Pattern Adjustments
I only made two adjustments to the back with the help of Jennifer Serrr, owner of The Sewing Room and pattern designer for Bonjour Teaspoon. She suggested 1.) taking in about 1/4″ (6 mm) to get rid of drag lines and 2.) dropping the back crotch curve by 3/8 inch (1 cm) for a little more ease. I added that amount to the hem so the hem length would remain the same. This photo is of my first mock-up. I made a second mockup to make sure those adjustments worked. The second one was fine so I went ahead and cut my fashion fabric.
Named Clothing designs for a height of 5′ 8″ (172 cm), which is my height. I decided I liked the long length on the model so I didn’t change it. (See my post on sewing pattern height.) I didn’t notice that my camera was slighted tilted downward so it’s making my culottes seem longer than they really are in this photo.
A note on accessories: I made the hat ribbon, which I first blogged about for Britex Fabrics here and reposted to my blog here. The necklace is from Macy’s, the shoes are by Arche, purchased from a discount designer store that’s no longer in business. I’m also wearing a striped vintage bracelet from one of my sisters. You can’t see it in this photo but you can see it in one of the earlier photos.
Mimosa Culottes Materials
- 2 1/2 yards (210 cm) of fabric ($3.50/yard for a total of $8.75)
- fusible interfacing for inner pocket bag
- 7-inch zipper
- hook and eye
- small button
- thread
If you want to use lining fabric for your pocket bag, add 1/2 yard of lining fabric. All the other materials were in my stash so I only bought the fabric to make the culottes.
I really like this pattern. Now I need more tops to wear with them! I bought the Named Clothing Lexi A-line Top, which goes well so maybe I’ll make that, too. Have you made any culottes?
Abbey says
These culottes look fab! I like the added texture of the fabric (and holy cow what a price you got on it–jealous!). I haven’t made or worn this type of trousers before, and am still not on board with the style for myself; I do like them on other people though!
I had forgotten all about the Lexi top pattern, but now I have to have it! ^__^ It’s a great shape, especially with culottes or other high-waisted trousers.
Chuleenan says
Thanks, Abbey! Yes, I was lucky to find that fabric. I’m not sure how well it will hold up. I noticed a tiny bit of pilling so I think I’ll need to be careful when I wash them. Culottes seem to go in and out of fashion.
I really like the shape of the Lexi top, too. I need to make it so I’ll have more tops to wear with my culottes. 🙂