I finally got around to making Toaster Sweater – Version 2 by Sew House Seven. Last year I made Version 1, which has raglan sleeves and a turtleneck. (You can get the pattern here.) I don’t know why it took me so long to get around to sewing Version 2, which Sew House Seven says “features a semi-high-neck that takes its inspiration from funnel and boat necks.” I love boatnecks so this neckline was very appealing to me.
I made my first Version 2 Toaster with some black french terry that I bought on sale at Fabric Outlet last fall. I consider it part of the #makeyourstash sewing challenge that I decided to participate in earlier this year. The #makeyourstash challenge is to use fabric that’s been in your collection for at least six months.
I made my black Toaster Sweater – Version 2 in April, the night before I was to fly to the East Coast to visit family and attend the first annual Meetup Togetherfest. It didn’t take very long to sew. There are just three pattern pieces – front, back and sleeve. The neck has a self-facing – you fold it over and to keep it in place, you stitch in the ditch at the shoulder seams.
I decided to cut size XL for a loose fit. I made size L when I made Version 1. I have broad shoulders and wanted extra ease in the hips. The only change I made to the pattern was to shorten the sleeves to 3/4 length, a nice length for Bay Area weather.
Here’s how I shortened the sleeve. I sliced it at the shorten/lengthen line and overlapped 8 inches (~20cm) of the pattern and folded the pattern to true the seams, and pinned the excess in place as you can see in the photo below. I used Swedish tracing paper that I got for my birthday to trace the pattern.
Note: I have long arms so if I shorted it by 8 inches to get a 3/4 length sleeve, then the sleeves on this pattern are unusually long. If you sew this pattern, measure the sleeve length and compare it to your arm measurement. You will likely need to shorten the sleeve.
The neckline is like a small boatneck or maybe you could call it a high boatneck?
Here’s a back view of the Toaster Sweater – Version 2. I used the zig-zag stitch on my sewing machine to sew this together. I decided not to use the serger because I didn’t want to fiddle with the tension and differential feed. Plus I had to finish packing for my trip.
Here’s a closer look at the front. You can (sort of) see that the shoulder seams go a little beyond my shoulder point. I knew it would be a little wide but I liked this relaxed look. French terry is so soft. This is so comfy to wear.
About a month after I made this version I decided to make another Toaster Sweater – Version 2. I had some medium-weight black cotton jersey fabric in my stash but only enough for the body, not the sleeves. So I looked in my stash for another knit and found this lightweight blue rayon fabric, which has a nice drape. Another score for #makeyourstash! I think I got the blue fabric on sale at Fabric Outlet.
For this version, I read the instructions and used what the pattern calls a “double stitch” for the seams – a zig-zag stitch and a straight stitch. I did that for this version. Then I finished the hems using a double needle, which you can’t really see in this photo. The trickiest part of sewing this Toaster Sweater was using the double needle at the corners because you can’t pivot your needle.
Sewing the sleeves was a little tricky because the rayon knit was lightweight. I had to use a ton of pins on the sleeve head. The black cotton knit was more stable. When I attached the sleeves to the body, I put the black knit on the bottom and had set the presser foot pressure to zero. I didn’t need to use a walking foot – having the heavier weight fabric on the bottom worked well and it sewed nicely.
The back hem of this Toaster Sweater – Version 2 is an inch longer than the front, which is a nice detail.
Here’s a back view where you can also see a bit of the high-low hem.
I’m wearing a skirt I hand sewed earlier this year. The skirt pattern is from the book Alabama Studio Sewing + Design by Natalie Chanin (affiliate link here).
I got the skirt fabric at Stonemountain & Daughter Fabrics, which has a great selection of knits. I originally bought the fabric to make some active wear but decided to make a skirt instead. I think the fabric colors work well together. The blue is the same intensity as this rust red.
I like this pattern so much I cut yet another Toaster Sweater, VErsion 2 with leftover ponte fabric from my fourth Pilvi Coat. I had about one full yard of that bold fabric, which I used to cut the front and back and making it tunic-length. Then I had big scraps that I could use for the sleeves. Stay tuned for my third Toaster Sweater!
Sewing Tip: If you want to experiment and use a lightweight knit fabric, you may want to put a strip of interfacing at the shoulders to give it a little extra reinforcement to prevent it from stretching out. It’s not needed for medium-weight fabrics.
I will be looking through my stash for more knit fabrics and making more Toaster Sweaters – Version 2. Do you have a favorite pattern that you’ve made multiple times? For me, it’s been the Pilvi Coat and now it looks like the Toaster Sweater will be a staple top for me.
Kate says
I love the way you have styled it with the beret and red skirt! I’m not sure if “cute” is what you had in mind but I can’t think of any other word right now 😉
Chuleenan says
Thank you, Kate! Glad I made this Toaster Sweater.