WIP Frocktails skirt with Marimekko fabric

WIP Frocktails skirt - Marimekko fabric - CSews.com

My Frocktails skirt is slowly coming together. I haven’t worked on it very much over the past few weeks and now I’ve got to finish it by Saturday – when the Bay Area Sewists Frocktails in February event is happening.

This was my #SewFrosting project that I started in January. I sewed the pleats in the back about a month ago. Here’s what the back initially looked like when I basted the pleats. You can see bits of white thread that I used.

WIP Frocktails Skirt - Marimekko fabric - back inverted box pleats - CSews.com

But I decided not to sew all the way down the red fabric. Instead I sewed about 2/3 of the way down and the back now looks like this.

Frocktails skirt - inverted box pleats on the back- CSews.com

I pinned the ribbons in place to see how it would look and then realized that the Petersham ribbon is a bit stiff and quite wide (2 inches, ~7.5 cm), it would be hard to bring the two sides close together. I chose Petersham ribbon because when I tied it, it would stay tied. The problem with a satin ribbon is that it’s rather slippery.

Ribbon tie for Frocktails skirt - Marimekko fabric - CSews.com

So I decided to fold the ribbon in thirds and then sew it to the top piece. Before I sewed the pleats with the ribbon ends inside, I fused some interfacing on the wrong side of the fabric to give it some extra support.

Frocktails skirt - ribbon at waist - CSews.com

It took me a long time to figure out how I wanted to place the pleats in the front. I needed to have some extra fabric for an adjustable waist – but not too much fabric or the waist would be too loose. (See my Chardon Skirt with adjustable waist.) So I played around with how deep those last two center pleats would be and how far apart to place them. I finally put them about 8.5 inches (~21.5 cm) apart.

Frocktails skirt - ribbon at waist sewn into inverted box pleats - CSews.com

I don’t have a dress form so I spent some time looking at different placements in front of my bathroom mirror. I mostly make garments from existing sewing patterns so I really didn’t need a dress form. Plus I don’t have space in my apartment to store a dress form.

However, this is a skirt that I’ve drafted and it would have been helpful to play arond with the pleats on a dress form.

I decided at the last minute to have a facing because I want the top of the skirt to have some body and it will also look more tidy on the inside. So I drafted a facing over the weekend and I’ll attach some lining to it. The box pleats are rather deep and I’d like to cover them up.

Here’s what’s left to do:

  • buy lining fabric (red? purple?)
  • attach lining fabric to facing
  • sew facing/lining to skirt
  • decide on whether to add an invisible zipper to the side
  • hem the lining
  • hem the skirt

If I can do a little bit every day I should be able to finish this by Saturday. How long does it usually take you to finish a project? I feel like this WIP Frocktails skirt is taking forever.

I also promised my husband I would help fix a sweater of his. I’m hand sewing suede elbow patches to a favorite sweater. I finished one patch yesterday – one more to go!

Author: Chuleenan

Chuleenan sews, collects hats and shoes, and is a fabric addict. She is also the organizer for the Bay Area Sewists Meetup group.

Comments, tips, or suggestions? I'd love to hear from you!

This site uses Akismet to reduce spam. Learn how your comment data is processed.