Hi, I’ve had this striped rayon fabric in my stash for quite a few years – an impulse buy from Discount Fabrics in San Francisco (back when they were still around 11th and Mission St.). I didn’t have any particular pattern in mind when I got it; I just liked it. Since I’ve been on a RTW fast this year – and somewhat of a fabric fast, I have been making an effort to shop my stash. And that’s when I decided to make a striped knit top with this fabric.
The pattern is the Top with Epaulettes from the Japanese sewing book She Wears the Pants by Yuko Takada (affiliate link here). I made it in 2015 using a medium-weight striped knit. You can see that version on my review of She Wears the Pants – just scroll to the end of the post to see photos of that top. I made size L and added more ease in the hips. I used the same pattern pieces.
What I really like about this top is the classic boat neck design and slightly belled sleeves, which you can (sort of ) see in this photo.
If you use a heavier weight knit, the sleeves will have more body and stand out a bit more like they do in my first version. I think if I make it again, I would use a heavier weight knit to show off the sleeve shape.
This fabric was a little fiddly. I had to take my time cutting out the front and back pieces so they would match on the side seams. First, I cut the back piece because I knew I wanted the dark stripe to be at the top. Before I cut the front piece, I carefully placed the back piece on the fabric, lining up the stripes. Then I placed the front pattern piece on the fabric so it lined up with the back.
I also knew that I wanted the hem to end on a black (or is it navy?) stripe, which meant I could just cut along the bottom edge of the white stripe. My plan was the fold the hem on the bottom edge of the dark stripe.
I pinned each stripe at the side seams, set the pressure on my presser foot to zero and sewed a zig zag stitch on my sewing machine. It was a nearly perfect match! I sewed a test piece before I sewed it. I didn’t use any stabilizer and it was fine.
Looks like a perfect side seam!
When I cut out my sleeves, I just cut them so the hem would end on a dark stripe. Hems get dirty and this is an easy way to hide the dirt. I wasn’t concerned about matching stripes across the body. I like the way it looks. I’m wearing my denim knit skirt with this striped knit top.
Here’s another view of the back.
The pattern for this striped top calls for topstitching the neck facing and the hems. I opted to hand sew the facing because I didn’t want to see topstitching around the neckline. But you can tell where I made my stitches – see the slight shadows in the white stripe below?
For the hems, I fused fusible stay tape on the wrong side of my fabric to stabilize it. Then I used a twin needle to sew the hems of this striped knit top. The stitches blend into the fabric so you really can’t see the stitches.
In case you’re wondering about the hat, it’s a vintage straw hat with a veil and a fun ribbon detail. I got the hat from All Things Vintage, a delightful shop in Oakland which always has a lovely selection of hats. The label on the inside says The Hat Box, H. C. Capwell Co., Oakland. I did a quick online search and discovered that Capwell’s was a department store in Oakland.
The building is still there in downtown Oakland. A Sears store was in the space for several years. Capwell’s also had branches in other parts of the Bay Area. You can read about Capwell’s history on the Department Store Museum blog and you can read more about the building on this Oakland wiki page. Uber bought the Capwell building in 2015 but sold it in 2017.
I love hats with veils – though they don’t really fit in with life today. In public, I usually wear my veiled hats with the veil up, tossed over the top of the hat.